Manual terminal ingenico iwl220 en espaol

Dating > Manual terminal ingenico iwl220 en espaol

Download links: → Manual terminal ingenico iwl220 en espaol → Manual terminal ingenico iwl220 en espaol

Проверьте правильность реквизитов на чеке ID терминала, ID организации, наименование и адрес организации. In the event that your terminal displays an error, refer to these error codes to troubleshoot your terminal. Провести операцию отмены оплаты товара на сумму 1. Using a Payment Card Inserting a Chip Card The card should be inserted with the chip facing uppermost.

If Cashback is not required, press the YELLOW button and continue from step 5 below. The terminal shall be protected by a specially fitted and certified cover enabling use in proximity to a fuel pump. This should power the terminal up without pressing any of the keys. If the roller bar is not present or has been broken off this will cause the terminal not to print. The cardholder should present their card against the Contactless symbol on the terminal display. Unplug the power cable to the base. This transaction is performed when a consumer uses the card to purchase goods or services. The terminal will now contact each card acquirer which your terminal is configured to accept. Read this section to ensure the settlement process operates smoothly. Once all the numbers or letters have been entered press the GREEN button to accept the entry. Интерфейсы для настройки терминала 2.

This message may appear when closing the Open Tab or completing the Pre-Auth transaction. Contact your voice authorization center for an authorization code, and then force the transaction.

Changing the Default Password - Загрузите параметры терминала: АМ АДМ. Complete the transaction and settle as soon as possible.

If the terminal is missing any of these symbols from the screen or not showing correctly please contact the helpdesk. Note: To remove the SIM card, lift the end of the SIM gently and pull the SIM card down. DO NOT use any tools to remove the SIM Card. Ensure the teeth on the black cog are not worn as shown below. If the roller bar is not present or has been broken off this will cause the terminal not to print. Please contact the helpdesk to arrange a replacement. This should power the terminal up without pressing any of the keys. There should also be a plug symbol on the screen on top left hand corner. Un-clip the top flap located at the back of the handset which will reveal the black coated round battery unit. The battery unit is held in by a white clip as shown below. Unplug the power cable to the base. If any are located nearby see if the terminal base could be relocated to a different area to test. If the plug symbol is present, this confirms the base is receiving power. If this is not showing, please contact the helpdesk. As the terminal is connecting via the internet ensure ETH is showing under the communication status icon. If the terminal is missing any of these symbols from the screen or not showing correctly please contact the helpdesk. This should power the terminal up without pressing any of the keys. There should also be a plug symbol on the screen on top left hand corner. Un-clip the top flap located at the back of the handset which will reveal the black coated round battery unit. The battery unit is held in by a white clip as shown below. Ensure the teeth on the black cog are not worn as shown below. If the roller bar is not present or has been broken off this will cause the terminal not to print. Please contact the helpdesk to arrange a replacement. Unplug the power cable to the base. If any are located nearby see if the terminal base could be relocated to a different area to test. If the plug symbol is present, this confirms the base is receiving power. If this is not showing, please contact the helpdesk. As the terminal is connecting via the internet ensure ETH is showing under the communication status icon. If the terminal is missing any of these symbols from the screen or not showing correctly please contact the helpdesk. This should power the terminal up without pressing any of the keys. There should also be a plug symbol on the screen on top left hand corner. Un-clip the top flap located at the back of the handset which will reveal the black coated round battery unit. The battery unit is held in by a white clip as shown below. Ensure the teeth on the black cog are not worn as shown below. If the roller bar is not present or has been broken off this will cause the terminal not to print. Please contact the helpdesk to arrange a replacement.